Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 02:49

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

What does a fuse do?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Chips Ahoy and Oreo maker Mondelez sues grocery chain Aldi over similar packaging - CNN

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

It seems Mohan does not understand the difference between a comment and an Answer.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Why does my mother care about my sister more than me?

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

He then describes the function of a fuse.

This is where this question deviates from being a 'generic' question, and becomes more specific.

Why is the Middle East prone to terrorism?

There are two important concepts here.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–10–16 [ OO OLAOYE OYEBODE ]

Celebrity hairstylist Jesus Guerrero died of pneumonia and fungal infection, likely complications from AIDS - NBC News

a photo is worth a thousand words.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This device then solves the entire problem.

Why are American women so ugly nowadays?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

The third is lightning and “how it gets conducted into a home.”

This one hit behind the barn.

Are there any penalties for bestiality in the USA and laws prohibiting it?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

These devices are installed between the “hot” and “neutral” and protective ground.

The MOV will conduct when the voltage exceeds 50% of line voltage.

What are the signs of covert narcissistic abuse that most people miss?

Because the load is inductive, the current lags the voltage.(by a bit).

[image of Common-mode choke]

One is “what exactly is in a ‘surge protector’ ? ”

In Italy, how do people greet each other when they meet for the first time (e.g., on the street)? What's a good response to that greeting if you're not from Italy or don't speak Italian fluently yet?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

What are "demonic attacks" and how can one tell when they're happening to them, or someone else? How would one go about dealing with it?

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

But… the neutral is now “floating” because of the 1 ohm resistance.

I'm straight, so why do I love watching guys cum?

For this case there are devices called Metal oxide varistors (MOV).

Barnstars:

eight

Why do people who were very kind and loving once become cold-hearted?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is where the MOV conducts again, and dissipated the energy.

2024–10–14 [Omar Gharbi Omar Gharbi ]

This is 'the assistant's answer'

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

At one ohm, the resistor has a maximum of 1 watt power.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Here is a simplified AC power diagram.

A fuse is a non-resetable over current circuit protector.

The other is “what does a “fuse” do?”

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Can the fuse protect the electronic devices from lightning instead of a surge protector.

An AC voltage/ current source, and an ac inductive load.

the problem then depends on "how fast does the fuse operate?".

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Upvotes:

but this device (an Inductor) … impedes the rapid changes in the current.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

But it can get overloaded, and no longer works.

nine

At least they know the answer if they wanted it.

what exactly is a ‘surge’ protector?

I post the exact comment here.

(Dc diagram shown, AC is similar).

but I think this circuit , shows a few more pieces.

First Sentence:

so, what happens?

One

He then asserts :

These are simplified answers to the original question, and does not change anything I wrote above.

Now when you have a certain ac resistance, then a current flows in a loop.

What is lightning?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

[old diagram got deleted by accident]

In schematic diagrams this is the symbol for a fuse:

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

2024–10–10[John johnson John Johnson ]

He then describes Rainy Season and Lightning.

Edit 2024–10.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

There are three different concepts here that are getting confused.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

So, the voltage could go up to 500 volts, and the fuse will not open up.

It also is a device that limits the change in current flow.

The bolt then partially travels down the line to your home.

A circuit breaker is similar, but is resettable.